DIAGNOSIS DISPLAY METHOD

Toyota 7fgu35 Parts

2013 Toyota 7FGU35, Forklift Trucks 0-19,999 Lb Engine-Driven Forklift Trucks This vehicle is located in LAKESIDE. Toyota Forklifts is the leader in material handling and industrial lift trucks and equipment. Learn about our solutions to maximize your warehouse efficiency.

Toyota 7fgu35 Manual

1. Diagnosis display method The diagnosis is displayed by means of an error code as shown in the illustration to the left, and by the lights turning on. When the ignition key switch is turned ON, the lamp lights once to allow checking for the bulb, and then turns off again if the status is normal. With the ignition key switch ON, if an abnormality is detected when the vehicle is stopped, travelling or performing meterials handling operations, an error code is displayed and the lamps turn on as a warning. When this happens, stop the vehicle immediately and check the error code.

2. Diagnosis memory display method To display the diagnosis memory display, there are a method using the hour meter and tilt lever, a method using the optional display, and a method using a plug-in analyzer. Here the display method using the hour meter and tilt lever is described. (1) From the main menu, display the diagnosis memory menu. For how to display the main menu, refer to page 18-30. (2) A diagnosis No. and error code are displayed each time the knob switch is pressed and released. Each error code and the time at which it occurred are displayed alternately at 2 second intervals.

(3) Connect the matching connector and turn the ignition key switch OFF.

LIST OF DIAGNOSIS CODES